Dvd camcorder: before recording, Videocámara con dvd: antes de grabar, English – Samsung SC-DC565-XAA User Manual

Page 43: Español

Advertising
background image

SP

Disc is not formatted.

Format?

Video

VR

Cancel

<When a DVD-RW disc is formatted.>

ENGLISH

43

ESPAÑOL

DVD Camcorder: Before Recording

When using a New Disc: Formatting a New Disc

Formatting may be required if a new disc is inserted.

Recognition of the disc will start.

For a DVD-R/+R DL disc: Formatting will automatically begin.

For a DVD-RW disc: You are prompted with the <Disc is not formatted.

Format?> message.

Differences between

Video and VR mode

Video (Video Mode) : If the disc has been fi nalized, you will

be able to play the disc on most DVD Players/Recorders.
VR (VR Mode) : You can edit the disc on a DVD

Camcorder, but playback is only possible on a DVD

Recorder that supports VR mode.

Move the

[Joystick] left or right to select <Video> or <VR>, then press

[Joystick(OK)].

Please refer to page 13 for disc type descriptions and usage.

Upon completion, the

<Complete!> message will appear.

If you select

<Cancel>, the <Not formatted!>

warning message will appear. Formatting a new

disc is required to record on it. To format later, use

the

<Disc Manager> menu. page 82

For a DVD+RW disc: You are prompted with the

<Disc format? All fi les will be deleted!> message.

Move the

[Joystick] left or right to select <Yes>, then

press

[Joystick(OK)].

Upon completion the

<Complete!> message will

appear.

If you select

<No>, the <Not formatted!> warning

message will appear. Formatting a new disc is

required to record on it. To format later, use the

<Disc Manager>

menu. page 82

Removing a Disc

1. Push the

[OPEN] switch in the direction of the arrow.

The disc cover will partially open.

2. Gently open the cover the rest of the way by hand.

3. Remove the disc.

While pushing down the center portion of the disc spindle, pick up

the disc by the edges to remove.

4. Gently push the section marked

[PUSH CLOSE] on the disc cover

to close it.

Note

The Finalize/Format functions are not available at battery level

and

.

Refer to page 14 for Finalized disc compatibility.

Videocámara con DVD: Antes de grabar

Al utilizar un nuevo disco: Formateo de discos

Será necesario formatear un disco nuevo al introducirlo.

Se iniciará el reconocimiento del disco.

Para un disco DVD-R/+R DL: Se iniciará automáticamente el formateo.
Para un disco DVD-RW: Aparecerá el mensaje <Disc is not formatted. Format?>

Diferencias entre el modo

Video y VR

Video (Modo Video): Si el disco se ha fi nalizado, podrá

reproducir el disco en la mayoría de los Reproductores/

Grabadoras de DVD.
VR (Modo VR): Puede editar el disco en una

Videocámara con DVD, pero la reproducción sólo es

posible en un Grabador de DVD que admita el modo VR.

Mueva el

[Joystick] a la izquierda o a la derecha para seleccionar <Video> o

<VR> y presione el botón [Joystick(OK)].

Consulte la página 13 para las aplicaciones por modo.

Al fi nalizar aparecerá el mensaje

<Complete!>.

Si selecciona

<Cancel>, aparecerá el mensaje <Not

formatted!>. Formatear un nuevo disco es necesario

para grabar en él. Para formatearlo posteriormente,

utilice el menú

<Disc Manager>. página 82

Para un disco DVD+RW: Aparecerá el mensaje

<Disc format? All fi les will be deleted!>.

Mueva el

[Joystick] a la izquierda o a la derecha para

seleccionar

<Yes> y presione [Joystick(OK)].

Al fi nalizar aparecerá el mensaje

<Complete!>.

Si selecciona

<No>, aparecerá el mensaje <Not formatted!>.

Formatear un nuevo disco es necesario para grabar

en él. Para formatearlo posteriormente, utilice el menú

<Disc Manager>. página 82

Extracción de un disco

1. Presione el interruptor

[OPEN] en la dirección de la fl echa.

La cubierta del disco se abrirá parcialmente.

2. Abra suavemente la cubierta con la mano el espacio restante.

3. Retire el disco.

Mientras presiona la parte central de la pletina, sujete el disco por los

bordes para retirarlo.

4. Empuje suavemente la sección marcada como

[PUSH CLOSE] en la

cubierta del disco para cerrarla.

Nota

La función Format/Finalize (Formato/Finalizar) no está disponible en el nivel

de batería

o

.

Consulte la página 14 para conocer la compatibilidad de un disco fi nalizado.

Mega_US_LS_2_060510_Film.indd 43

2006-05-22 ソタネト 5:19:30

Advertising
This manual is related to the following products: