Dvd camcorder: advanced recording, Videocámara con dvd: grabación avanzada, English – Samsung SC-DC565-XAA User Manual

Page 51: Español, Cutting off wind noise (wind cut), Corte de ruido del viento (wind cut)

Advertising
background image

4

Move

OK

Select

MENU

Exit

►SP

►Off

Camera Mode

►Record

Rec Mode

Wind Cut

6

Move

OK

Select

MENU

Exit

Off

On

Camera Mode

►Record

Rec Mode

Wind Cut

7

STBY

30 min

SP

-RW

VR

0:00:00

ENGLISH

51

ESPAÑOL

Cutting Off Wind Noise (Wind Cut)

The

Wind Cut function works only in Camera Mode. page 28

Use the Wind Cut when recording in windy places such as the

beach or near buildings.

The Wind Cut function minimizes wind noise or other noise while

recording.

- When the Wind Cut is on, some low pitched tones are

eliminated along with the sound of the wind.

1. Set the

[Mode] switch to [DISC].

2. Set the

[Power] switch to [

(Camera)].

3. Press the

[MENU] button.

4. Move the

[Joystick] up or down to select

<Record>, then press the [Joystick(OK)].

5. Move the

[Joystick] up or down to select

<Wind Cut>, then press the [Joystick(OK)].

6. To activate the Wind Cut function, move the

[Joystick] up or down to select <On>,

then press the

[Joystick(OK)].

7. To exit, press the

[MENU] button.

Wind Cut icon (

) is displayed.

Note

Make sure

Wind Cut is set to Off when you want

the microphone to be as sensitive as possible.

DVD Camcorder: Advanced Recording

Corte de ruido del viento (Wind Cut)

La función

Wind Cut sólo está operativa en el Camera Mode.

página 28

Use la función Wind Cut cuando grabe en lugares donde sople el

viento, como en la playa o cerca de edificios.

La función Wind Cut minimiza el ruido del viento y otros ruidos

durante la grabación.

- Cuando la función Wind Cut está activada,

se eliminan algunos sonidos graves junto

con los del viento.

1. Coloque el interruptor

[Mode] en [DISC].

2. Coloque el interruptor

[Power] en

[

(Camera)].

3. Presione el botón

[MENU].

4. Mueva el

[Joystick] hacia arriba o hacia

abajo para seleccionar

<Record> y pulse el

botón

[Joystick(OK)].

5. Mueva el

[Joystick] hacia arriba o hacia

abajo para seleccionar

<Wind Cut> y pulse el

botón

[Joystick(OK)].

6. Para activar la función Wind Cut, mueva el

[Joystick] arriba o abajo para seleccionar

<On> y pulse el botón [Joystick(OK)].

7. Para salir, presione el botón

[MENU].

Aparece el icono Wind Cut (

).

Nota

Asegúrese de que la función

Wind Cut esté

Off cuando quiera que el micrófono sea lo más

sensible posible.

Videocámara con DVD: Grabación avanzada

Mega_US_LS_2_060510_Film.indd 51

2006-05-22 ソタネト 5:19:43

Advertising
This manual is related to the following products: