Samsung SPH-M580ZKASPR - Manual (Page 130)

116 2H. Camera
Press and tap > to activate
camera mode. (Additional camera options are
available through the camera settings page. See
“Camera Settings” on page 116 for more
information.)
2. Using the device’s display screen as a viewfinder,
aim the camera lens at your subject.
3. Press or tap until the shutter sounds.
(Your device automatically saves the picture to the
DCIM folder on the microSD card.)
Camera Settings
1. From camera mode ( ), you can also move
the camera mode slider (right of the screen) to the
camcorder position (
) (to switch from
camera to camcorder and record videos).
– or –
Touch the camera’s side panel and adjust any of
the following options:
Ⅲ Camera settings to access camera hardware
settings:
● Review Mode to change the length of time the
recently-taken photo displays onscreen before
returning to Camera Mode. Choose from:
2 seconds or Off .
● Brightness to set the value of light that displays
within the picture color.
● Night Mode to select a camera setting for
better image capture under a darker lighting
environment.
● Picture size to set the size of your image.
Choose from: 2M Pixels , 1M Pixels , VGA Pixels,
or QVGA .
● Picture quality to set the image quality for your
image. Choose from: Super fine , Fine , or
Normal .
● Color effect to apply different color effects onto
images. Choose from: None (default), Mono ,
Sepia , Negative , or Aqua .
● Camera Settings to restore the settings to the
default parameters.
Ⅲ Store location to store the actual location (latitude
and longitude) where the image was taken so the
photo can later be displayed on Google Maps or
used in other social applications.