Samsung SPH-M580ZKASPR - Manual (Page 74)

60 2B. Settings
3. Touch and drag the onscreen slider, adjust the
volume level, and tap
OK .
Ⅲ Within Volume, touch Use incoming call volume for
notifications to match notification volume to the
current call ringtone volume.
Vibrate
To set your device to vibrate for incoming calls and silent
for notifications:
ᮣ Press the volume button down in standby mode
until you see
on the screen.
To set your device to always vibrate for incoming calls:
1. Press > and tap > Sound >
Vibrate .
2. Tap a feature to enable it. A green light indicates
the feature is enabled:
Ⅲ Always : your device vibrates for all incoming calls
and notifications.
Ⅲ Never : your device uses sound only for all
notifications and alerts.
Ⅲ Only in silent mode : your device vibrates for
notifications and alerts when Silent mode is
active.
Ⅲ Only when not in Silent mode : your device only
vibrates for notifications and alerts when Silent
mode is not active.
To set your device to vibrate while using the dialpad:
1. Press > and tap > Sound .
2. Tap Haptic feedback . (If you have already checked
the option, tapping it again deselects the option.)
Silence All
The Silence All option allows you to mute all sounds
without turning your device off (except for Media
volume).
To activate Silence All:
ᮣ Press and hold the volume button down in standby
mode until you see
on the screen.
Tip: You can adjust the ringer volume in standby mode (or
the earpiece volume during a call) by pressing the
volume button on the left side of your device.