Samsung SPH-M580ZKASPR - Manual (Page 137)

2I. Bluetooth 123
Bluet
oot
h
To change your Bluetooth name:
1. Verify your Bluetooth is active.
2. Tap Device name and enter a new name to
complete the renaming process.
To make your device visible:
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap Discoverable .
Ⅲ Making your device discoverable allows it to be
detected by other devices for pairing and
communication.
To scan for Bluetooth devices:
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap Scan for
devices to search for visible external Bluetooth-
compatible devices such as Headsets, devices,
printers, and computers.
Pairing Bluetooth Devices
Paired Devices
The Bluetooth pairing process allows you to establish
trusted connections between your device and another
Bluetooth device. When you pair devices, they share a
passkey, allowing for fast, secure connections while
bypassing the discovery and authentication process.
To pair your device with another Bluetooth device:
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap Discoverable .
Your device must be visible to successfully pair
with an external device.
3. Tap Scan for devices . (Your device will display a list
of discovered in-range Bluetooth devices.)
4. Tap a device from the list to initiate pairing.
5. Enter the passkey or PIN code and tap Done > OK .
6. The external device will then have to also accept
the connection and enter your device’s PIN code.
Note: Your device is visible for up to 120 seconds
(2 minutes). This value appears as a countdown within
this field.