Samsung SPH-I325DLASPR - Manual (Page 142)

128 Section 2J. Bluetooth
To access the Bluetooth Settings screen:
1. Press the Power button, select Wireless Manager,
and press .
2. Highlight the Bluetooth field and press Menu
(right softkey) > Bluetooth Settings .
3. Press Menu (right softkey) to set your Bluetooth
options.
Ⅲ Select Turn Off Bluetooth to disable Bluetooth. If
Bluetooth is already turned off, this option will be
Turn On Bluetooth .
Ⅲ Select Turn On Visibility to make your device visible
to other Bluetooth-enabled devices. If visibility is
already turned on, this option will be
Turn Off
Visibility .
Ⅲ Select COM Ports to set up a COM port (after
pairing with a device) by pressing Menu (right
softkey) > New Outgoing Port .
About Discoverability (Visibility)
Making your device discoverable (visible) allows other
devices to detect it when they search for in-range
Bluetooth-compatible devices. Your device must be
turned on and the built-in Bluetooth radio must also be
turned on and discoverable. To turn on your device's
visibility, see step 3 in “To access the Bluetooth
Settings screen:” on page 128.
Bluetooth Profiles
All of the Bluetooth settings you configure are stored in
your device’s Bluetooth user profile. You can use
different profiles for specific Bluetooth functions.
ⅷ HSP: Headset Profile – This profile functions as a
wireless ear jack. When an incoming call is received,
the ringer can be heard through the headset instead
of through the device. The call can then be received
by pushing a button. While using the device, you can
use the headset instead of the device by pushing a
button on the headset, the same as inserting a jack
into the device. Increase or decrease the volume by
using the volume key on the side of the device.
Note Another way to navigate to the Bluetooth Settings
screen is
Start > All Programs > Settings >
Connections > Bluetooth .
I325.book Page 128 Monday, October 27, 2008 12:20 PM