Samsung SPH-I325DLASPR - Manual (Page 80)

66 Section 2C. Your Device’s Security
1. Press Start > All Programs > Settings > More... >
Security .
2. Select Device Lock and press .
3. Select “Prompt if device unused for” and press
. (Enabling this option activates the remaining
fields.)
4. Select each field and enter the required
information:
Ⅲ Time: select the amount of unused time (idle)
required before you are prompted for a password.
Ⅲ Password type: to choose from one of the following
PIN types:
● Simple PIN: must be at least four characters in
length and cannot contain a simple sequence
such as 000, 1111, or 1234.
● Strong alphanumeric: must be at least seven
characters in length and must contain at least
one character from each of the following
categories: uppercase/lowercase letters,
numerals, symbols. Examples of strong
alphanumeric passwords are
sb?8A!3 and
%$VH5hW .
Ⅲ Password: use the keypad to enter the desired
password.
Ⅲ Confirm password: use the keypad to re-enter the
same password.
5. Press Done (left softkey) > Yes (left softkey) to store
these settings.
Unlocking Your Device Using a Password
Once the preset time has expired, the display screen
will dim and the taskbar
Start option is replaced with
Unlock .
1. From standby mode, press Unlock .
2. Enter your password using the keypad.
3. Press Unlock .
Changing the Device Lock Code
1. Press Start > All Programs > Settings > More... >
Security .
2. Select Device Lock and press .
3. Enter your password using the keypad.
4. Press Unlock .
I325.book Page 66 Monday, October 27, 2008 12:20 PM