Samsung SPH-I325DLASPR - Manual (Page 17)

Setting Up
Ser
vice
Section 1A. Setting Up Service 3
2. Install the battery.
Ⅲ Insert the battery into the opening on the back of
the device, making sure the connectors align.
Gently press down to secure the battery.
Ⅲ Position the battery cover and firmly slide it in until
you hear a click.
3. Press to turn the
device on.
Ⅲ Your device will turn on,
search for Sprint service,
and then enter standby
mode.
Ⅲ If your device is not yet
activated, or if it is
locked, see “Activating
Your Device” on page 5
for more information.
Initial Setup
After you have powered on
your device, you may wish to set some basic options.
After the initial power-up, your device will display the
Windows Mobile
® screen where you will be guided
through a series of setup procedures.
1. From initial screen, press Next (right softkey) to
begin the setup process.
I325.book Page 3 Monday, October 27, 2008 12:20 PM