Playback – Samsung SC-D383-XAP User Manual
Page 68
64_ English
臺灣 _64
播放
逐幀播放（按逐幀進行播放）（僅限 SC-D382/D385)
在暫停模式中、按遙控器上的
F.ADV 按鈕。
- 視訊順序會在您每次按
F.ADV 按鈕或
❙❙
(+) 按鈕時按逐幀播放。
-
F.ADV（逐幀播放）功能僅可在暫停模式下操作。
若要恢復正常播放、可按下
(PLAY) 按鈕。
- 逐幀前進播放
在暫停模式中、按遙控器上的
F.ADV 按鈕或
❙❙
(+) 按鈕。
- 逐幀倒退播放
按遙控器上的
❙❙
(-) 按鈕以變更逐幀播放模式
的方向。
X2 播放（前進 / 倒退）（僅適用於
SC-D382/D385)
X2 前進播放
- 播放時按遙控器上的
X2 按鈕。
- 若要恢復正常播放、可按下
(PLAY) 按鈕。
X2 倒退播放
- 在 X2 前進播放期間按
❙❙
(-) 按鈕。
- 若要恢復正常播放、可按下
(PLAY) 按鈕。
倒退播放（僅適用於 SC-D382/D385）
若要以正常速度倒退播放、請在正常前進播放時按遙控器上的
❙❙
(-) 按鈕。
按
(PLAY) 按鈕或
❙❙
(+) 按鈕以返回正常前進播放。
一些播放模式中可能會在螢幕上出現馬賽克狀失真。
當您播放以
LP 錄製、具有多項播放功能的錄影帶時、可能
會經歷馬賽克狀失真或噪波。
只有在正常
SP 或 LP 播放時可聽到音效。
若要啟動遙控器、可將
"Remote" 設定為 "On"。
➥
第 25 頁（僅適用於 SC-D382/D385）
•
•
•
•
•
•
•
•
•
playback
Frame Advance (To play back frame by frame)
(SC-D382/D385 only)
Press the
F.ADV button on the remote control while in pause mode.
- Video sequence advances frame by frame each time you press
the
F.ADV button or
❙❙
(+)
button.
- The F.ADV function works in pause mode only.
To resume normal playback, press the
(PLAY)
button.
-
Forward frame advance.
Press the
F.ADV button or
❙❙
(+) button on the
remote control in pause mode.
-
Reverse frame advance
Press the
❙❙
(-) button on the remote control to
change the direction in F.ADV mode.
X2 Playback (Forward/Reverse)
(SC-D382/D385 only)
Forward X2 Playback
- Press the X2 button on the remote control
during playback.
- To resume normal playback, press the
(PLAY)button.
Reverse X2 Playback
- Press the
❙❙
(-) button during forward X2 playback.
- To resume normal playback, press the
(PLAY) button.
Reverse Playback (SC-D382/D385 only)
To play back in reverse at normal speed, press the
❙❙
(-) button
on the remote control during normal forward playback.
Press the
(PLAY) button or
❙❙
(+) button to return to normal
forward playback.
Mosaic shaped distortion may appear on the screen while
in some of the various playback modes. Mosaic shaped
distortion or noise may be experienced when you play
back tapes recorded in LP which contain various playback
functions.
Sound will only be heard during normal SP or LP playback.
To activate the remote control, set
"Remote" to "On".
➥
page 25 (SC-D382/D385 only)
•
•
•
•
•
•
•
•
•
<SC-D382/D385 only>