記憶卡中的資料夾與檔案結構 – Samsung SC-D383-XAP User Manual

Page 77

Advertising
background image

臺灣 _73

73_ English

請勿在插入 / 退出記憶卡時過度用力。
請勿在錄製、載入、刪除相片影像或格式化記憶卡時關閉電源。
請勿在插入或退出記憶卡之前關閉電源以免遺失資料。
請勿將記憶卡放置在強大的電磁裝置附近。
請勿讓金屬物質接觸到記憶卡上的端子。
請不要將記憶卡彎曲、掉落或使它受到強大的衝撞。
從攝錄放影機取出記憶卡後、將其存放在軟盒中以防止靜電
損害。
儲存在記憶卡上的資料可能會由於誤用、靜電、電源噪訊或
維修、而變更或遺失。將重要的影像分開儲存。

Samsung 將

不負責由於誤用所造成的資料遺失。

RS MMC 或 Mini SD 必須使用適配器插入(未提供)。

M.CamM.Player 模式中、不支援 16:9 寬螢幕模式。

寬螢幕僅以 4:3 的畫面比例顯示。
攝錄放影機支援

2GB SD/MMC 及以下。超過 2GB 的

SD/MMC 可能無法正常錄製或播放。

記憶卡的資料夾和檔案結構如下所示:
切勿隨意變更或移除資料夾或檔案名稱。可能會無法播放。

DCF(相機檔案系統設計規則)開頭命名檔案。

影像配置檔案 1

它用於儲存照片檔案(如

DPOF)的資料。

影片影像檔案 2

格式化具有以下檔案名稱的影片影像:

SMOV_####.

AVI。在建立新影片影像檔案時、會自動增加檔案編號。

在檔案編號超過 99 時、請建立新資料夾、並將其儲存為

101SSMOV。

相片影像檔案 3

如同在影片影像檔案中一樣、在建立新影像檔案時、會
自動增加檔案編號。照片影像的數目超過 99 時、就會建
立新的資料夾。新資料夾可從

DCAM_0001.JPG 開始儲

存檔案。資料夾名稱會按

100SSDVC 101 SSDVC 等

的順序增加。

記憶卡中的資料夾與檔案結構

Do not apply excessive force when you insert/eject the memory card.

Do not turn the power off while recording, loading, erasing a photo

image or formatting the memory card.

Turn the power off before you insert or eject the memory card to avoid

losing data.

Do not place the memory card near a strong electro-magnetic device.

Do not allow metal substances to come in contact with the terminals

on the memory card.

Do not bend, drop or apply strong shock to memory card.

After removing the memory card from the camcorder, keep it in a soft

case to prevent static shock.

The data stored on the memory card may be changed or lost as

a result of misuse, static electricity, electric noise or repair. Save

important images separately. Samsung is not responsible for data loss

due to misuse.

RS-MMC or Mini SD should be inserted by using the Adaptor (not supplied).

In

M.Cam or M.Player mode, the 16:9 wide mode is not supported.

The wide screen only displays in the aspect ratio of 4:3.

The camcorder supports up to 2GB SD/MMC and lower. SD/MMC

above 2GB may not record or play properly.






The folder and fi le structure for the memory card is as follows:

Do not arbitrarily change or remove the folder or fi le name. It may not be playable.

The fi le naming follows DCF (Design rule for Camera File System).

Image confi guration fi le 1

This is where data for photo fi les such as DPOF are stored.

Movie image fi le 2

The movie images are formatted with a fi le name as follows:

SMOV_####.AVI. The fi le number automatically increases

when a new movie image fi le is created. When the number

of fi les exceeds 99, a new folder is created and it is stored as

101SSMOV.

Photo image fi le 3

As in movie image fi les, the fi le number automatically

increases when a new image fi le is created. When the number

of photo images exceeds 99, a new folder is created. A new

folder stores fi les from DCAM_0001.JPG. The folder name

increases in the order of 100SSDVC 101 SSDVC, etc.

STRUCTURE OF FOLDERS AND FILES ON ThE MEMORY CARD

MSAMSUNG

DCIM

MISC

SSMOV

...

100SSMOV
SMOV0001.AVI
SMOV0002.AVI

...

...

...

100SSDVC
DCAM0001.JPG
DCAM0002.JPG

...

...

1

2

3

Advertising
This manual is related to the following products: