Samsung SC-D383-XAP - Manual (Page 75)

臺灣 _71 71_ English
USING THE VOICE+ FUNCTION 使用 VOICE+ 功能
Voice+ 功能只能在 Player 模式下操作。➥ 第 18 頁
當您想在其他 AV 裝置上播放或錄製已錄製的錄影帶影片時、您可
傳遞來自您攝錄放影機內部麥克風的聲音音效、而不是預先錄製的
錄影帶上的音訊訊號。
1. 將提供的聲訊 / 視訊線連接到攝
錄放影機的 AV 插孔。
2. 配對終端的顏色、將線的另一端連
接至 VCR/DVD 錄放影機 / 電視機。
3. 將選擇開關設定為 TAPE（僅適用
於 SC-D383/D385）
4. 按下 MODE 按鈕以設定 Player
( ).
5. 往該攝錄放影機放入您要播放的錄
影帶。
6. 在播放期間在想要的時間點按錄製
開始 / 停止按鈕。
Voice+ ( ) 指示器顯示在螢幕
上、且 "VOICE+" 將會在螢幕
上閃爍一會。
來自內部麥克風的音效將被傳輸
到所連接的 AV 裝置上、來替代
錄影帶上的預先錄製音效。
7. 若要取消該功能、可再次按下錄製開始 / 停止按鈕。
Voice+ 僅當聲訊 / 視訊線連接時有效。如果
連接不同的纜線（ DV 或 USB 纜線（僅適用
於 SC-D383/D385））、則 Voice+ 功能可能無
法正常工作。
如果您在操作 Voice+ 功能時移動 Joystick
(///) 則 Voice+ 功能將被停用。
在 Voice+ 過程中、 MENU 和 PhOTO 按鈕
功能將不起作用。
Voice+ 功能不會影響錄製的錄影帶上的原始
音效。
使用 Voice+ 功能時、音效將從該攝錄放影機
上的內部麥克風傳輸到連接的 AV 裝置。因
此應確保麥克風沒有被堵塞。
調整連接外部裝置上的音量。( 如電視機等 )
由於靠近外接裝置的揚聲器可能會發出尖銳
的長嗚、因此請使攝錄放影機與外部裝置保
持一定的距離。
在連接之前、確保已調低外部裝置的音量。
忘記調低音量可能會導致外接裝置的揚聲器
發出尖銳的長嗚。
•
•
•
•
•
•
•
•
•
•
•
•
•
The Voice+ function works only in Player mode. ➥ page 18
When you want to play back or record a tape-recorded movie on
other AV device, you can transfer the voice sound incoming from
the internal microphone of your camcorder, instead of the audio
signals on a prerecorded tape.
1. Connect the provided Audio/
Video cable to the AV Jack of
the camcorder.
2. Connect the other end of the cable
to the VCR/DVD Recorder/TV by
matching the colors of the terminals.
3. Set the Select switch to TAPE.
(SC-D383/D385 only)
4. Press the MODE button to set
Player ( ).
5. Insert the tape you wish to play
back in this camcorder.
6. Press the Recording start/stop
button on a point where you want
during the playback.
Voice+ ( ) indicator is
displayed on the screen and
"VOICE+" will fl icker on the
screen for a while.
Sound incoming from the internal microphone will be transferred to the
connected AV device, instead of the pre-recorded sound on the tape.
7. To cancel the function, press the Recording start/stop button again.
Voice+ is available only when the Audio/Video cable
is connected. If a different cable (DV or USB cable
(SC-D383/D385 only)) is connected, Voice+ function
may not operate properly.
If you move the Joystick (///) when you
operate Voice+ function, Voice+ function will be
deactivated.
During the Voice+ process, the MENU and PhOTO
button functions do not work.
The Voice+ function does not affect the original
sound on the recorded tape.
Sound is transferred from the internal microphone
on this camcorder to the connected AV device,
when using the Voice+ function. So make sure that
this microphone is not blocked.
Adjust the sound volume on the connected external
device. (TV, etc.)
Howling may occur near the speaker of an external
device, please keep the camcorder at a distance
from the external device.
Before connecting, make sure that the volume on the
external device is turned down. Forgetting this may
cause howling from the external device's speakers.
•
•
•
•
•
•
•
•
••
•
•
MIX[1+2]
16BIt S
AV In
12:00 1.JAN.2008
0:00:20:23
60min
SP
MIX[1+2]
16Bit S
AV In
12:00 1.JAN.2008
0:00:20:23
60min
SP
Voice+
AV
MODE
DV
POWER
CHG
AV Jack
Audio/Video Cable
VCR
TV