Playback, S-vhs playback, Variable search system – Samsung DVD-VR375A-XAA User Manual

Page 56: Slow motion, Go to zero, End search, Forward/reverse intro scan

Advertising
background image

56_

playback

playback

Slow motion

In Pause mode, press (

) button for slow motion. Press the (

) button repeatedly to play slow motion at

1/10, 1/7, 1/5 normal speed. Press the PLAY button twice to resume normal viewing.

S-VHS Playback

The DVD Recorder & VCR allows you to playback high quality S-VHS tapes.

Insert an S-VHS tape into the VCR deck.

Press PLAY (

) button on the remote control or on the front panel to play an S-VHS tape.

Variable Search System

Each time you record a cassette on this DVD Recorder & VCR, an index is automatically marked on the tape
when recording is started.The Search function allows you to fast-forward or rewind to a specifi c index and
start playback from that point.

This DVD Recorder & VCR uses a standard indexing system (VISS).

As a result, it will recognize indexes marked by other VCRs using the same system and vice versa.

Go To Zero

Use this feature when you want to search for the 0:00:00 counter position on a cassette.

Press the CANCEL button at the point on the tape where you
want to set the counter to 0:00:00.

While the cassette is stopped, press the ANYKEY button.

Press the

▲▼ buttons to select Go To Zero, then press the

ENTER

button.

The VCR will rewind or fast forward, searching for the 0:00:00
counter position, and then automatically stop at that position.

End Search

Use this feature when you want to search for a blank position to record a program on a cassette.

While a cassette is stopped, press the ANYKEY button.

Press the

▲▼ buttons to select End Search, then press the

ENTER

button.

The VCR will fast forward, searching for a blank position, and
then automatically stop at that position.

If the VCR reaches the end of the tape during end search, the
tape will be ejected.

Forward/Reverse Intro Scan

Use scan and play when you don’t know exactly where a program is located on a cassette tape.

While a cassette is stopped, press the ANYKEY button.

Press the

▲▼ buttons to select Forward Intro Scan or

Reverse Intro Scan, then press the ENTER button.When an
Index mark is found the DVD Recorder & VCR will playback the
tape for 5 seconds, after which it will continue searching for the
next Index mark.

1.

2.

•

1.

2.

3.

1.

2.

1.

2.

Go to Zero

End search
Forward Intro Scan
Reverse Intro Scan

>Move

sEnter

Go to Zero

End search

Forward Intro Scan
Reverse Intro Scan

>Move

sEnter

Go to Zero
End search

Forward Intro Scan

Reverse Intro Scan

>Move

sEnter

01613A-03-VR375-XAA-ENG.indb 56

01613A-03-VR375-XAA-ENG.indb 56

2008-06-11 오후 2:18:38

2008-06-11 오후 2:18:38

Advertising