Samsung GX-SM530CF-XAA - Manual (Page 21)

19
Wireless Network
Wireless Router
Broadband
service

▶ If the wireless router supports DHCP, your product can use a DHCP or static IP address to connect to the wireless network.
▶ Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.
▶ The product supports only the following wireless security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)
▶ Select a channel on the wireless router that is not currently being used. If the channel set for the wireless router is currently being used by
another device nearby, it will result in interference and communication failure.
▶ In compliance with the newest Wi-Fi certification specifications, this product does not support WEP, TKIP, or TKIP-AES (WPS2 Mixed) security
encryption in networks running in the 802.11n mode.
▶ If your router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal
Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
▶ Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance, distance, obstacles,
interference by other radio devices, etc).
▶ To use the Samsung Link function with your PC, you must connect your PC to your network.
▶ Web Authentication based Internet services, such as Hotel on Office networks, are not supported during the Initial Installation.
Connections h Connecting to a Network Router