Samsung SC-D33-XAA - Manual (Page 56)

ENGLISH
52 52
Advanced Recording
● WIND CUT
✤ The WIND CUT function works in CAM and PLAYER (SCD34/D39 only) modes.
✤ The WIND CUT function minimizes wind noise or other noise while recording.
-
When the wind cut is on, some low sounds are eliminated along with the sound of the wind.
1. Set the camcorder to CAM mode.
2. Press the MENU button.
■ The menu list will appear.
3. Move the MENU SELECTOR to highlight A/V and push the MENU SELECTOR.
4. Select WIND CUT from submenu.
5. This feature toggles ON/OFF each time you push the MENU SELECTOR.
■ is shown in the display when you turn the WIND CUT on.
6. To exit, press the MENU button.
Notes
■ Make sure WIND CUT is set to off when you want the microphone to be as sensitive as possible.
■ Use the WIND CUT when recording in windy places such as the beach or near buildings.
CAM MODE
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE
12
SOUND[1] AUDIO SELECT
WIND CUT
A / V SET
PB DSE
OUT AV IN/OUT
CAM MODE
INITIAL
WIND CUT
PB DSE
REC MODE
PHOTO SEARCH
COPY
AUDIO MODE
12
AV IN/OUT OUT
AUDIO SELECT
CAMERA
A/V
MEMORY
VIEWER
00654B SCD30-SEA (28~59) 5/6/03 8:52 AM Page 52