Samsung SC-D33-XAA - Manual (Page 85)

ENGLISH
81 81
USB interface
Connecting to a PC
1. Connect a USB cable to the USB port on the PC.
2. Connect the other end of the USB cable into the proper terminal on the camcorder. (USB jack)
- If a PC is connected to the camcorder with a USB cable, only the Power Switch, Zoom Switch, Mode switch
and NITE PIX operate.
Disconnecting the USB cable
✤ After completing the data transmission, you must disconnect the cable in the following way:
1. Select the removable disc icon and click the right mouse button to select [Eject].
2. Select [Confirm] and disconnect the USB cable when the Windows Splash screen appears.
Notes
■ If you disconnect the USB cable from the PC or the camcorder while transferring, the data transmission will stop and the
data may be damaged.
■ If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB
devices, the camcorder may not work properly.
-
If this occurs, remove all USB devices from the PC and reconnect the camcorder.
USB Cable
00654B SCD30-SEA (60~107) 5/6/03 8:53 AM Page 81