Samsung SC-D33-XAA - Manual (Page 67)

ENGLISH
Advanced Recording
63 63
✤ The AUDIO DUBBING function only works in PLAYER Mode.
✤ You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound.
✤ Use the internal and external microphones or other audio equipment.
✤ The original sound will not be erased.
Dubbing sound
1. Set the camcorder to PLAYER mode.
■ If you want to use an external microphone, connect the microphone to
the external MIC input jack on the camcorder.
■ When you wish to dub using the External A/V input, connect the
Multi-AV cable to the camcorder by inserting the Multi-AV cable into the
Multi-AV Jack at the front side of the camcorder.
(SCD34/D39 only)
-
Press the MENU button, move the MENU SELECTOR to highlight A/V
and push the MENU SELECTOR.
- Move the MENU SELECTOR to highlight AV IN/OUT and
push the MENU SELECTOR to select AV IN/OUT.
- Move the MENU SELECTOR to highlight AV IN(or S-VIDEO IN) and push
the MENU SELECTOR to select AV IN(or S-VIDEO IN).
2. Press the (PLAY/STILL) button and find the timeframe of the scene to
be dubbed.
3. Press the (PLAY/STILL) button to pause the scene.
4. Press the A.DUB button on the Remote Control.
■ A.DUB will be displayed on the LCD.
■ The camcorder is in a ready-to-dub state for dubbing.
5. Press the (PLAY/STILL) button to start dubbing.
■ Press the (STOP) button to stop the dubbing.
Notes (SCD34/D39 only)
■ You can not use the audio dubbing function while playing a write protected video tape.
■ When you wish to dub using the External A/V input, you must connect the Multi-AV cable to the audio system from which you
wish to record.
■ You can not dub sound on a pre-recorded tape in LP mode or 16 bit mode.
Audio dubbing
AV IN
Audio (R) Audio (L)
(SCD34/D39 only)
00654B SCD30-SEA (60~107) 5/6/03 8:53 AM Page 63