Samsung SC-D33-XAA - Manual (Page 82)

ENGLISH
78 78
IEEE 1394 Data Transfer
● System requirements
■ CPU : faster Intel ® Pentium III™ 450Mhz compatible.
■ Operating system : Windows ® 98SE, ME, XP, Mac OS (9.1~10.2)
■ Main memory : more than 64 MB RAM
■ IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV connection cable
1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied) from the DV IN/OUT port of
the camcorder to the DV IN/OUT port of the other DV device.
■ Make sure that DV IN appears on the screen.
3. Press the START/STOP button to begin REC PAUSE mode.
■ PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
■ If you want to pause recording momentarily, press the START/STOP button again.
6. To stop recording, press the (STOP) button.
Notes
■ When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.
■ Operation are not guaranteed for all the recommanded computer environments mentioned above.
00654B SCD30-SEA (60~107) 5/6/03 8:53 AM Page 78