Samsung LT27B750NDX-ZA - Manual (Page 20)

Connecting the Power Cord and the Antenna or Cable Connection
ANT OUT
Power Input
or
Cable
Antenna Cable (Not Supplied)
VHF/UHF Antenna
✎ Plug the power cord into a wall outlet only after you have made all other connections.
✎ If you are connecting your product to a cable or satellite box using HDMI, Component, or Composite connections,
you do not need to connect the ANT IN jack to an antenna or a cable connection.
✎ Connect the power adapter to DC 14V on the rear of the product. Connect the power cord to the adapter and wall
socket. (The input voltage is switched automatically.)
✎ Use caution when you move or swivel the product if the antenna cable is tightly connected. You could break the
antenna jack off the product.
Getting Started
English - 20 English - 21