Samsung LT27B750NDX-ZA - Manual (Page 21)

Configuring the Basic Settings in Initial Setup
When you turn the product on for the first time, a sequence of screens and on-screen prompts will assist you in
configuring the product’s basic settings. Plug the power cord into a wall outlet, and then press the
P button to turn on
the product.
✎ Setup is available only when the Source is set to TV . See "Changing the Input Source" (page 30).
✎ To return to the previous step in the Setup sequence, select Previous .
✎ If you are not using a cable box or satellite box, make sure you have connected the product to an antenna or cable
connection before you turn on the product. See page 20 for instructions.
✎ If you want to configure a wired network connection during Setup, make sure you've connected a LAN cable to
your product. See page 61 for instructions. If you want to configure a wireless network connection during Setup,
make sure your wireless modem or router is on and working. See page 62 for instructions.
1 Menu Language :
Select a Language.
After you press the P button, the Start screen appears. Select Next to continue.
The Menu Language screen appears. Select the menu language you want using
your remote, and then select
Start . The product will display on-screen menus
using the language you select beginning with the next step in the Setup process.
2 Use Mode : Select the
Home Use Mode.
On the Use Mode screen, select the Home Use mode using your remote, and then
select Next . The Network Settings screen appears.
✎ Store Demo mode is for retail environments only. If you select Store Demo ,
some functions will not work, and the product will reset all functions to their
factory default after a certain period of time. For more information about
Store Demo , go to the end of this section.
3 Network Settings :
Configure the network
settings
✎ To configure
later, select
Skip .
You can set up
the network
connection later
using the on-
screen
Network
menu.
To configuring your network settings, select Next using your remote, and then go
to 3A - Wireless Network or 3B - Wired Network on the next page.
If you do not know your network configuration information or want to configure
the settings later, or do not have a network, select
Skip , and then go to 6 - Auto
Program (1) on page 23.
To configure network settings later, refer to the Network Connection sections in
this manual (pages 61 and 62).
Getting Started
English - 20 English - 21