Samsung LT27B750NDX-ZA - Manual (Page 40)

Speaker Settings
Menu → Sound → Speaker Settings
• Speaker Select
If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound
echo caused by the difference in decoding speed between the product’s speakers and the speakers attached to
your audio receiver. If this occurs, set the product to
External Speaker .
✎ When the Speaker Select is set to External Speaker , the product’s speakers are turned off. You will hear
sound through the external speakers only. When the Speaker Select is set to TV Speaker , both the product’s
speakers and the external speakers are on. You will hear sound through both.
✎ When the Speaker Select is set to External Speaker , the volume buttons and mute function will not operate
and the sound settings will be limited.
✎ If there is no video signal, both the product’s speakers and the external speakers will be mute.
• Auto Volume
Because each station has its own broadcasting conditions, the volume may fluctuate each time you change
the channel. This feature automatically adjusts the volume of a channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.
✎ To use the volume control of a connected source device, set Auto Volume to Off . A change to the volume
control of the connected source device may not be applied if Auto Volume is set to Normal or Night .
Reset Sound
Menu → Sound → Reset Sound
Reset all sound settings to the factory defaults.
English - 40 English - 41 English - 40 English - 41
Basic Features for the Monitor