How to assemble and attach the stand-base – Samsung HPP5091X-XAA User Manual

Page 28

Text mode
Original mode

Advertising

Firmly secure the pegs to the both sides of the stand base using 8 screws provided.

How to assemble and attach the

Stand-Base

This guide is for the SMN5040 stand.

Using the 4 screws for securing the stand pegs and the monitor, firmly attach the monitor to the
stand pegs. (The exterior of the set may be different than the picture.)

For your convenience, the angle of the PDP may be adjusted up to 20° left/right.

Note

• Stand is sold seperately. Check with your dealer.

Warning

Firmly secure the stand for the PDP
before moving it, as the stand may fall
and could cause serious injury.

Advertising