Samsung HPP5091X-XAA - Manual (Page 44)

44
1 Press the MENU button on the remote control.
2
Use the ▲ or ▼ button to select “Channel”, then
press the ENTER button.
3
Press the ▲ or ▼ button to select “Signal Strength”,
then press the ENTER button. The “Signal Strength”
meter will be displayed.
If the signal strength meter indicates that the signal is
weak, physically adjust your antenna to increase the
signal strength. Continue to adjust the antenna until
you find the best position with the strongest signal.
4 When you have finished adjusting your antenna,
use the MENU button to exit.
Note
• “No Signal” may appear on the screen depending on the broadcast station conditions,
even if an incoming broadcast signal exists.
Checking the Digital-Signal Reception
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital
(HDTV) channels have perfect reception or you will not receive them at all. In this case,
you cannot fine tune a digital channel. But you can adjust your antenna to improve the
reception of available digital channels.
Signal Strength TV
Return
Mini Guide √
Full Guide √
Remind List √
Default Guide : Mini Guide √
Guide TV
Move Enter Exit
Select Antenna : Air
Auto Program √
Add/Delete √
Fine Tune √
Signal Strength √
Channel TV
Move Enter Return