Samsung SGH-ZX20ZKACIN - Manual (Page 77)

Section 7: Messaging 77
8. Using the Up or Down Navigation key, highlight New and press the Select
soft key or the key.
The following options appear in the display:
•
Set Name: enter a name that you wish to assign to the HTTP or WAP proxy
server.
•
Access Name: enter the access server name.
•
Auth Type: select a connection type.
•
User ID: enter the User ID required to connect to the network.
•
Password: enter the password required to connect to the network.
•
Protocol: select a web page format. Select HTTP or WAP.
•
Home URL: enter the address of your startup homepage. When the default
homepage displays, you can delete it by pressing and holding the
key.
•
Proxy Address/Gateway Address: enter the WAP Gateway IP Address or
HTTP Proxy IP Address required to connect to the Internet.
Note: The Proxy Address/Gateway Address field is determined by your Protocol
selection.
•
Port/Secure Connection: enter the Proxy port required to connect to the
Internet or select On or Off to activate or deactivate Secure Connection.
Note: The Port/Secure Connection field is determined by your Protocol selection.
•
Linger Time (Sec.): allows you to enter a time that will time-out the WAP
browser when there is no activity.
•
Advanced Settings: allows you to enable and enter the server Static IP
address, Static DNS address and select a Traffic Class.
Creation Mode
Creation Mode allows you set content limits.
Slide Interval
Slide Interval allows you to select or enter how long you want a page in an
Multimedia message to appear in the display before automatically moving to the
next page.