Samsung SGH-ZX20ZKACIN - Manual (Page 93)

Section 8: Changing Your Settings 93
Connecting to a Bluetooth Device
From the My Devices list,
1. Highlight the device and press the Select soft key or the key.
2. Enter the PIN for the device.
If connecting to a Bluetooth wireless device consult your Bluetooth device
user manual for your assigned PIN.
If connecting to another handset, enter a user-defined four to eight digit
PIN.
Note: The first time you try to pair with a handset, you and the owner of the other
handset must enter the same PIN.
Once the handsets are paired, you will not need to use the PIN again.
3. Press the OK soft key or the key.
4. If you are unable to pair with the device a popup appears in the display.
Press the Yes soft key to retry.
My Phone’s Visibility
Allows other users to see your accessibility. Select On for other devices to see your
device, or Off for no visibility.
My Phone’s Name
Shows the handset name. You may change this name enter the text and press the
key.
Secure Mode
Secure mode provides the ability to monitor data stored on the handset. If another
person trys to connect to my phone and access my phone's data, using the "Secure
mode", you can decide whether it is allowed. That is, if the Secure mode is set as
On, whenever the other person trys to access my phone's data, the phone will
always ask you to allow him, if the Secure mode is set as Off, he can access my
phone`s data without permission.
Bluetooth Services
Actually, the Bluetooth specification is a protocol that describes how the short-range
wireless technology works, whereas individual profiles describe the services
supported by individual devices. Profiles reduce the chance that different devices
will not work together.