Basic display navigation principles, Control functions – American Power Conversion XR User Manual

Page 18

Advertising
background image

Operation – Navigation

10

Smart-UPS® VT 10-30 kVA, 208/220 V and XR Battery Enclosure Operation Manual 990-1599B

Basic display navigation principles

On the display, press ESC until you get to the Overview Screen, which provides you with basic
system status information.

Press UP, DOWN arrows to navigate the selector arrow and view all sub-menu screens.

Press ENTER to open the Main Menu screen. From here, you command, configure, and monitor the
system.

Control functions

From the Control screen on the Main Menu, you can select the following functions:

• Switch Load OFF/ON

• Switch the UPS into Bypass/out of Bypass

Switch load OFF (disconnect the UPS output to the load equipment):

• From the Main Menu, select Control and press ENTER

• Use UP/DOWN key to navigate to Turn Load Off, and press ENTER

• Select YES, Turn Load Off

Chrg 100%

Load 000%

120Vin 000Vout 60Hz

Runtime: 0hr 0m

Overview Screen

Control

Status

Setup

Logging

Display

Diags
Help

Main Menu

WARNING!
Disconnecting the UPS output to the load, does NOT de-energize the UPS! Always
follow the Total-Power-OFF procedure if you need to de-energize the UPS in
emergency situations!

Control

Status

Setup

Logging

Display

Help

Diags

Main Menu

Advertising
This manual is related to the following products: