American Power Conversion XR - Manual (Page 48)

Appendix – UPS Components and Options
40 Smart-UPS® VT 10-30 kVA, 208/220 V and XR Battery Enclosure Operation Manual 990-1599B
User interface
 Display: user-control interface used to configure the functionality, monitor the system, set alarm
thresholds, and to provide audible and visual alarms.
 Network Management Card with Environmental Monitor (AP9619): used for remote system
control and monitoring, e-mail notifications etc.
 Computer-interface port for the connection of computers with APC Powerchute ® software.
 Mechanical Bypass Lever: used to bypass the upstream mains power around the UPS to support
the load directly = internal mechanical bypass operation.
 Service port (for APC maintenance personnel only).
10/100Base-T Probe
AP9619 Network Managemen t Card EM
!
Reset
Output Pwr Zone
10/100
Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT
Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT
Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT
Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT Model: Serial:
BATTERY UNIT







