Battery module removal, How to install a battery module – American Power Conversion XR User Manual

Page 38

Advertising
background image

Operation – Battery Replacement

30

Smart-UPS® VT 10-30 kVA, 208/220 V and XR Battery Enclosure Operation Manual 990-1599B

Battery Module removal

Follow the below procedures if you need to change or add a Battery Module, e.g. if you receive a
display message reporting a bad battery, or if you need to add batteries for increased runtime:

When removing Battery Modules, start from the highest level and work down.

Holding the battery handle, gently push the battery unit upwards and pull it halfway out of the
Enclosure. A lock mechanism prevents it from being pulled all the way out.

To release the battery from the lock mechanism, one person gently pushes the battery upwards
again and pulls it out, while the other person supports the battery.

How to install a Battery Module

If additional batteries are needed for extra run-time, or if you install battery replacement modules
etc., follow the below procedure:

Two people to lift components weighing between 40 - 70 lbs / 18 - 32 kg.

10/100Base-T

Probe

AP9619 Network Management

Card EM

!

Reset

Output

Pwr

Zone

10/100

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

Model:

Serial:

BATTERY UNIT

UPS

XR

CAUTION!
Wait until you are ready to power up the system before installing Battery Modules in the
UPS. Failure to do so can result in a deep discharge of the batteries and cause permanent
damage (the time from the battery installation time till the UPS is powered up should
not exceed 72 hours or 3 days).

Advertising
This manual is related to the following products: