Samsung SPH-M240ZKASPR - Manual (Page 14)

2 1A. Setting Up Service
ࡗ Setting Up Your Phone (page 2)
ࡗ Activating Your Phone (page 3)
ࡗ Setting Up Your Voicemail (page 3)
ࡗ Sprint Account Passwords (page 4)
ࡗ Getting Help (page 5)
Setting Up Your Phone
1. Install the battery. (See “Installing the Battery” on
page 14.)
Ⅲ In a single motion, press down on the cover and
slide it towards the grill and then carefully lift the
battery cover away from the phone.
Ⅲ Insert the battery into the opening, making sure
the connectors align. Gently press down to
secure the battery.
Ⅲ Replace the cover by lining up the tabs and then
firmly sliding the cover back until it snaps into
place.
2. Press to turn the phone on.
Ⅲ If your phone is activated, it will turn on, search for
Sprint service, and enter standby mode.
Ⅲ If your phone is not yet activated, see “Activating
Your Phone” on page 3 for more information.
3. Make your first call.
Ⅲ Use your keypad to enter a phone number.
Ⅲ Press .
]\
1A. Setting Up Service
Note Your phone’s battery should have enough charge for
your phone to turn on and find a signal, set up your
voicemail, and make a call. You should fully charge
your battery as soon as possible. See “Charging the
Battery” on page 16 for details.
Sprint M240.book Page 2 Sunday, July 26, 2009 11:11 AM