Samsung SPH-M240ZKASPR - Manual (Page 25)

Phone Bas
ics
2A. Phone Basics 13
Turning Your Phone On and Off
Turning Your Phone On
1. Flip the phone open.
2. Press and hold for two seconds.
Once your phone is on, it will look for a signal. When
your phone finds a signal, it enters standby mode – the
phone’s idle state. At this point, you are ready to begin
making and receiving calls.
If your phone is unable to find a signal after 15 minutes
of searching, a PowerSave feature is automatically
activated. When a signal is found, your phone
automatically returns to standby mode.
In PowerSave mode, your phone searches for a signal
periodically without your intervention. You can also
initiate a search for Sprint service by pressing any key
(when your phone is turned on).
Turning Your Phone Off
1. Press and hold for two seconds until you see
the powering-down animation on the display
screen.
2. Flip the phone closed.
Missed Call – You have missed an incoming call.
Missed Alarm – You have missed an alarm event.
Missed Scheduler – You missed a scheduled
event.
Record – A voice memo is currently being
recorded.
Stop – A voice memo has been stopped.
Pause – A voice memo has been paused.
Play – A voice memo is playing.
Other Icons
Tip The PowerSave feature conserves your battery
power when you are in an area where there is no
signal.
Sprint M240.book Page 13 Sunday, July 26, 2009 11:11 AM