Samsung SPH-M240ZKASPR - Manual (Page 39)

Phone Bas
ics
2A. Phone Basics 27
Dialing From the Contacts List
1. Press > Contacts .
– or –
Press CONTACTS (right softkey) in standby mode.
2. Highlight the entry you want to call and press
to dial the entry’s default phone number.
– or –
To dial another number from the entry, highlight
the name and press
, and then highlight a
number and press .
Speed Dialing
You can store up to 98 numbers in your phone’s speed
dial memory. Dial speed dial entries using one
keypress for locations 2–9 or two keypresses for
locations 10–99.
To use One-Touch Dialing for speed dial locations 2–9:
ᮣ Press and hold the appropriate key for
approximately two seconds. The display confirms
that you have dialed the number when it shows
“Connecting...”
To use Two-Touch Dialing for speed dial locations 10–99:
1. Press the first digit.
2. Press and hold the second digit for approximately
two seconds. The display confirms that you have
dialed the number when it shows “Connecting...”.
Entering Text
Your phone provides convenient ways to enter letters,
numbers, emoticons, and symbols whenever you are
prompted to enter text (for example, when adding a
Contacts entry or when using Sprint Mail and Text
Messaging).
In this section we’ll cover the steps necessary to enter
text while the phone is in portrait mode where the
keypad is the primary method of both text and
character entry.
Note Speed dialing is not available when you are roaming;
when you are roaming off the Sprint Nationwide
Network, you must always dial using eleven digits
(1 + area code + number).
Sprint M240.book Page 27 Sunday, July 26, 2009 11:11 AM