ATEN Altusen KVM on the Net KN2108 - Manual (Page 25)

Rack Mounting
The KN2108 / KN2116 can be installed in most standard 19" (1U) racks. To
rack mount the unit do the following:
1. Separate the front and rear modules by removing the four module
attaching screws:
2. Use the screws you just removed, and the ones supplied with the rack
mounting kit to screw the rack mounting brackets into both modules:
M3X10
Phillips hex head
Phillips Hex Head
M3 x 10
2005-08-24
Chapter 2. Hardware Setup
13