ATEN Altusen KVM on the Net KN2108 - Manual (Page 33)

Powering Off and Restarting
If it becomes necessary to power off the KN2108 / KN2116, or if the switch
loses power and needs to be restarted, wait 10 seconds before powering it
back on. The computers should not be affected by this, but if any of them
should fail, simply restart them.
Port Selection
Port Selection is accomplished by means of the OSD. OSD Operation details
are discussed in Chapters 5 and 61.
2005-08-24
Chapter 2. Hardware Setup
21