ATEN Altusen KVM on the Net KN2108 - Manual (Page 53)

Chapter 5.
The Windows Client
Activating the OSD
After you have successfully logged in (see p. 37), to activate the Windows
Client OSD do the following:
1. Click the Windows Client button at the left of the web page.
Note: You must have DirectX 7.0 or higher installed on your computer.
If not, the Windows Client will not load. If you don’t already have
it, DirectX is available for free download from Microsoft’s web
site: http://www.microsoft.com/downloads.
2. Accept the security certificates.
3. When the browser dialog asks what to do with the program file, click
Open.
Note: 1. If the browser cannot run the file, save it to disk, instead. Then,
with your browser still open to the KN2018 / KN2116 web
page, run the file from your disk.
2. If you use the save to disk method, for security purposes, you
cannot simply run a previously downloaded version of the
program. Each time you want to access the KN2018 / KN2116,
you must log in to the web page with a valid username and
password to download a fresh copy of the program.
2005-08-24
41