Allied Telesis x510 Series - Manual (Page 71)

x510 Series Installation Guide for Virtual Chassis Stacking
71
Figure 23. Attaching the Equipment Rack Brackets (Continued)
5. While another person holds the switch in the equipment rack, secure it
using standard equipment rack screws (not provided), as shown in
Figure 24.
Figure 24. Mounting the Switch in an Equipment Rack
6. Repeat this procedure to install the remaining switches in the stack.
7. After installing the switches, go to Chapter 5, “Verifying the Status of
VCStack” on page 73 to verify that VCStack is enabled on the units.