Allied Telesis AT-2972T/2 - Manual (Page 84)

Chapter 7: Installing the Novell NetWare Driver Software
84
Driver Installation
This chapter describes how to perform the following tasks:
ˆ Verify that the required OS support files are installed on the server and
the NetWare pre-installation parameters are set correctly.
ˆ Install the driver software in the Novell NetWare environment.
ˆ If necessary, reconfigure the driver software after installation.
ˆ For an adapter installation with an existing NetWare server, NetWare
automatically detects the new adapter and attempts to load the
appropriate driver. You can download the latest version of the software
driver from the Allied Telesis website at www.alliedtelesis.com/
support/software.
A commonly used method to install a driver on a NetWare server running
5.x or 6.0 and higher is through NWCONFIG.