Allied Telesis AT 8000/8POE - Manual (Page 256)

Chapter 21: SNMP
256 Section II: Web Browser Interface
Enabling or Disabling the SNMP Agent
To enable or disable the SNMP agent, perform the following procedure:
1. From the Basic Config menu, select User Interface.
2. From the User Interface menu, select User Interface.
The User Interface page is shown in Figure 65 on page 229.
3. For the SNMP Agent parameter, choose Enable or Disable from the
list.
The default is Enable. When you enable this parameter, SNMP access
is allowed.
4. Click Apply.