Allied Telesis AT 8000/8POE - Manual (Page 96)

Chapter 6: Port Trunking
96 Section I: Using the Menus Interface
The Advanced Switch Configuration Menu is shown in Figure 21 on
page 87.
2. From the Advanced Switch Configuration Menu, type T to select
Trunk Configuration.
The Trunk Configuration Menu is shown in Figure 22 on page 88.
3. From the Trunk Configuration Menu, type O to select S to select Set
Trunk Status.
The following prompt is displayed:
Enter trunk group number>
4. Enter the trunk group number.
Set trunk group n status (A/P/M/D)>
5. Type D to select Disabled.