Allied Telesis AT 8000/8POE - Manual (Page 289)

AT-S81 Management Software User’s Guide
Section II: Web Browser Interface 289
Enabling or Disabling GVRP
The GARP VLAN Registration Protocol (GVRP) allows network devices to
share VLAN information. For more information about GVRP, refer to
“GVRP” on page 131.
To enable or disable GVRP, perform the following procedure:
1. From the Advanced Config menu, select VLAN Config. > VLAN Info.
The VLAN Information page is shown in Figure 84 on page 282.
2. From the GVRP Status list, choose Enable or Disable.
3. Click Apply.