Allied Telesis AT 8000/8POE - Manual (Page 327)

AT-S81 Management Software User’s Guide
Section II: Web Browser Interface 327
To download or upload a configuration file, perform the following
procedure:
1. From the Tools menu, select Config. File Upload/Download.
The Configuration File Upload/Download page opens, as shown in
Figure 104.
Figure 104. Configuration File Upload/Download Page
2. From the Download/Upload Config File list, choose Upload to upload a
file to the TFTP server, or Download to download the configuration file
from the TFTP server to the switch.
3. Change the following parameters as necessary:
TFTP Server IP
The IP address of the TFTP server.
Config File Name
The name of the configuration file. There is no default name for the
configuration file.
Retry Count
The number of times you want the switch to retry in the event a
problem occurs during the upload or download process. The range is 1
to 20, and the default is 5 times.
4. Click Apply.
The following message is displayed:
Are you sure you want to Upload/Download the new
configuration file?
5. Click OK to continue, or Cancel to stop the process.