Allied Telesis AlliedView-UM 2.0 - Manual (Page 100)

Device Selection
Before device selection can be performed, a license list file must be specified. After selecting
a license list file, the serial numbers contained within will be checked against the serial
numbers of the currently loaded devices. The IP Address of each matching pair will be
added to the Available Devices list.
Except for the above mentioned process, device selection is similar to that of the Release
Upgrade Operation pane.
B. Saving an Enable Feature Profile
1. Click on the button.
2. The Save Enable Features Profile dialog box will be displayed.
3. Specify the filename.
4. Finally, click on the button.
AlliedView™-UM 2.0 USER’S GUIDE Page 100 of 128