Allied Telesis AlliedView-UM 2.0 - Manual (Page 72)

3. The Load Patch Upgrade Profile dialog box will be displayed. Specify the filename of
the profile to be loaded.
4. Finally, click on the button. AlliedView-UM will load the specified Patch
Upgrade Operation profile.
NOTE:
The Patch Upgrade Operation profile contains the Selected Devices list. While loading, AlliedView-UM checks each item in
this list against the currently loaded devices in the Device Families Pane. Only entries that have a matching device in the
Device Families Pane will be loaded and added to the Selected Devices list in the Patch Upgrade Operation pane.
A summary window will be displayed indicating which entries were successfully added.
D. Starting the Patch Upgrade Operation
The Patch Upgrade Operation can only be started when the parameters have been properly
set.
1. Click on the button.
AlliedView™-UM 2.0 USER’S GUIDE Page 72 of 128