Allied Telesis AlliedView-UM 2.0 - Manual (Page 85)

D. Starting the Execute Script File Operation
The Execute Script File Operation can only be started when the parameters have been
properly set.
1. Click on the button.
2. A progress window will be displayed, indicating the overall status of the operation.
When the Execute Script File operation ends, the Operation Logs pane will be
updated to contain detailed information about the operation for each device.
3. Clicking the or the button will abort the Execute Script File operation.
Depending on the time this button is clicked, the operation may or may not
complete for devices that are in progress. Devices that were not able to complete
the operation will have a status of “Aborted”.
AlliedView™-UM 2.0 USER’S GUIDE Page 85 of 128