Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGER - Manual (Page 16)

AlliedView™-EMS 3.10 Device Manager User’s Guide Page 16 of 133
Starting from SNMPc
2.2.1 Starting From Castle Rock SNMPc
To start Device Manager from SNMPc, double-click on a node icon on the map
window. If the node is supported by Device Manager, the main panel of the node
is displayed.
Note that Device Manager and SNMPc run independently of each other, so
exiting SNMPc has no effect on Device Manager. Device Manager continues to
run even after SNMPc stops running. To exit Device Manager, select Exit from
its File menu.
Note - SNMPv3: In order to start Device Manager in SNMPv3 mode, the node's
Read/Write Access Mode attribute should be set to SNMP V3 No-Auth, SNMP V3 Auth-
MD5 , SNMP V3 Auth-SHA, SNMP V3 Priv Auth-MD5, or SNMP V3 Priv Auth-SHA, depending
on the SNMPv3 settings configured on the target device.