Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGER - Manual (Page 7)

2 Starting Device Manager
Device Manager can be started in two ways, from the command line or from a
network management application.
When started, Device Manager identifies the target device after you enter its IP
address. Device Manager will then display the main panel of that device.
Note - In Windows environments, Device Manager can also be launched from the
Start menu or from the Run command in the File menu.
Topics:
• Starting From the Command Line
• Starting From a Network Management Application
2 Starting Device Manager
AlliedView™-EMS 3.10 Device Manager User’s Guide Page 7 of 133