Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGER User Manual
Page 36
Select Target Host dialog box
Target host
The host name or the IP address of the target host. To see the
description of the host, fill in host name or IP address and click Confirm.
To connect to the host, click OK.
Note
- If "v3" is the selected SNMP version and the specified user account
has no READ VIEW access to the System Description OID but has READ
VIEW access to the System Object ID, clicking on the confirm button will
display the message, "Unable to retrieve system description."
SNMP Options
Version
This drop down list allows you to select the SNMP version to use in
managing the target device.
Note
- Before choosing "v2c" or "v3", make sure that the target device
you are connecting to supports SNMP v2c and/or SNMP v3 respectively.
AlliedView™-EMS 3.10 Device Manager User’s Guide
Page 36 of 133