Allied Telesis AlliedView-EMS 3.10 DEVICE MANAGER - Manual (Page 18)

AlliedView™-EMS 3.10 Device Manager User’s Guide Page 18 of 133
firmware v1.0.2 in the network. Use the LAN IP address of the device and a
host name that is unique within the network.
Note - HP-UX : When manually adding an AT-AR255E running firmware v1.0.2
to the network map in HP OpenView, use the device’s host name, as specified in
the local hosts file, for the Hostname field in the IP Map dialog. Using the
device’s IP address instead of its host name will reset the Hostname field to
“RIP2-ROUTERS.MCAST.NET” causing Device Manager to connect to any
RIP2 router present in the network when started within HP OpenView.
Note - HP OpenView can only start Device Manager in SNMPv1 mode.