Allied Telesis ALLIEDVIEW-UM 1.6 - Manual (Page 104)

Allied Telesis AlliedView-UM 1.6
User's Guide
PN 613-000381 Rev B
Page 104 of 129
14.4 STARTING THE ENABLE FEATURES OPERATION
The Enable Features Operation can only be started when the parameters have been properly set.
1. Click on the button.
2. A progress window will be displayed, indicating the overall status of the operation. When the Enable
Features Operation ends, the Operation Logs pane will be updated to contain detailed information about
the operation for each device.
3. Clicking the or the button will abort the Enable Features Operation. Depending on the
time this button is clicked, the operation may or may not complete for devices that are in progress.
Devices that were not able to complete the operation will have a status of “Aborted”.
NOTE:
Aborting an operation may leave some devices in an undesirable state.