Allied Telesis ALLIEDVIEW-UM 1.6 - Manual (Page 97)

Allied Telesis AlliedView-UM 1.6
User's Guide
PN 613-000381 Rev B
Page 97 of 129
13.4 STARTING THE HELP FILE UPDATE OPERATION
The Help File Update Operation can only be started when the parameters have been properly set.
1. Click on the button.
2. A progress window will be displayed, indicating the overall status of the operation. When the Help File
Update operation ends, the Operation Logs pane will be updated to contain detailed information about
the operation for each device.
3. Clicking the or the button will abort the Help File Update Operation. Depending on the
time this button is clicked, the operation may or may not complete for devices that are in progress.
Devices that were not able to complete the operation will have a status of “Aborted”.
NOTE:
Aborting an operation may leave some devices in an undesirable state.