Allied Telesis ALLIEDVIEW-UM 1.6 - Manual (Page 66)

Allied Telesis AlliedView-UM 1.6
User's Guide
PN 613-000381 Rev B
Page 66 of 129
9.4 STARTING THE PATCH UPGRADE OPERATION
The Patch Upgrade Operation can only be started when the parameters have been properly set.
1. Click on the button.
2. A progress window will be displayed, indicating the overall status of the operation. When the Patch
Upgrade operation ends, the Operation Logs pane will be updated to contain detailed information
about the operation for each device.
3. Clicking the or the button will abort the Patch Upgrade operation. Depending on
the time this button is clicked, the operation may or may not complete for devices that are in
progress. Devices that were not able to complete the operation will have a status of “Aborted”.
NOTE:
Aborting an operation may leave some devices in an undesirable state.