Allied Telesis AT-S41 - Manual (Page 114)

AT-S41 User’s Guide
114
Setting the VLAN Type
The AT-8326GB switch can operate in either the 802.1Q VLAN mode for
creating tagged and untagged VLANs or the port-based VLAN mode.
Note
The VLAN Type default is 802.1Q.
The change the VLAN mode, perform the following procedure:
1. From the Main Menu, type A to select the Advanced Switch
Configuration Menu.
2. From the Advanced Switch Configuration Menu, type V to select
VLAN Management.
3. From the VLAN Management Menu, type T to select Set VLAN Type.
The following prompt is displayed.
Set VLAN type (P/8)>
4. Enter P for the Port-based VLAN Type or 8 for the 802.1Q VLAN Type.
Note
Changing the VLAN type setting deletes all VLANs except the
Default VLAN.